วันพฤหัสบดีที่ 4 เมษายน พ.ศ. 2556

D-Link DES-3828P - 24-Port 10/100Mbps Switch with PoE + (2) Combo 1000BASE-T/SFP + (2) 1000BASE-T Driver/Firmware


VersionDescriptionDateFile
4.00.B55Enhancements:
1.Support Loopback Detection v4.0 (a. STP independent, b. Per port or per VLAN shutdown option when there is a loop detected).
2.Support IEEE802.1v Protocol-based VLAN.
3.Support MLD snooping v1/v2.
4.Configurable RIP Timers: Update interval, Timeout interval, Garbage_collection interval.
5.Support OSPF Equal Cost Route: Max. ECMP number of a route is 8.
6.Support Host-based IGMP Fast Leave: When enabling IGMP Fast Leave, the default behavior is Host-based and this is not changeable. 1K host table is supported.
7.Support 2nd default route: Primary/backup route is supported. ECMP is not supported.
8.Support IPv6 Awareness: IPv6 ACL, IPv6 Classification - DSCP Remarking.
9.Support Per Flow Bandwidth Control.
10.Safeguard Engine Enhancement: Limit the bandwidth for ARP Request/IP Broadcast instead of blocking them in previous releases.
11.Add logout timer for Web-based Access Control.
12.Support IP-MAC Port binding v3.3 (with DHCP Snooping).
13.Support DHCP Server.
14.Support Loopback IP Interface: Up to 2 Loopback IP Interfaces.
15.The number of terminal lines on the display is configurable.
16.Enhance the Web UI for finding a MAC Address in MAC Address Table. Before this release user must key in MAC address with "-", for example "12-23-34-45-56-67".
17.Display remaining ACL rules on Web/CLI.
18.Allow User level of accounts to execute “ping” command.
19.Stop contacting to TACAS+ server periodically before logging-in.
20.Rename "DLF" to "Unicast" in Traffic Control feature.
21.Enhancement for 3-Level User Access Right feature: Disallow user to execute "enable admin" command when authenticating using local or Radius database. TACAS/TACAS+/XTACAS users still can execute "enable admin" because TACAS/TACAS+/XTACAS do not support user level definition.
22.Add an OID to show port utilization.
23.Enhancement for per port limited IP multicast address range: Support up to 24 profiles and each profile can add up to 128 multicast groups. Max multicast group per port can join is configurable and the max number is 256.
24.Add a command “show access_profile current_config” to display the user-configured access profiles. (The existing “show access_profile” command displays all access profiles configured not only by users but switches.)
25.Change link of D-Link logo to www.dlink.com.tw. This web site will redirect HTTP requests to the regional D-Link web site of each country.
26.Enhancement for MAC-based Access Control, Web-based Access Control, and 802.1X: If a VLAN assigned from the Radius server does not exist on the switch, the switch will not assign this VLAN to the port.
27.New Web panel on Web UI.
28.Allow untag VLANs to overlap on a port. 29.Upgrade Bridge-MIB from rfc2674.mib to rfc4363.mib.v 30.Combo port configuration: copper port and fiber port can be configured separately.
31.A private MIB that can clear ARP & Forwarding table.
32.A private MIB that can advertise tag when creating VLAN
11/12/2008
VersionDescriptionDateFile
-D-view10/15/2008
VersionDescriptionDateFile
4.5Command Line Interface Reference Manual10/15/2008
4.5User Manual10/15/2008

ไม่มีความคิดเห็น:

แสดงความคิดเห็น

Related Posts Plugin for WordPress, Blogger...
Driverbiggershares - แจกฟรี ไดร์เวอร์ ,เฟิร์มแวร์ ,รอมโปรแกรม