D-Link DWL-8600AP - Wireless Unified 802.11n Access Point Driver/Firmware

Version	Description	Date	File
3.00	H/W: A1 Changes in this firmware: 1. [NEW] Keep Management Parameters after Factory Reset: The APs support a CLI factory-reset keepmanagement command for the APs preserved certain configured parameters after the factory-defaults reset 2. [NEW] AP Hidden Page support: The AP Web UI supports a hidden page that can be accessed from the URL http:///version.txt. This page displays some AP information including the AP firmware version and MAC address 3. [NEW] Default SSID values: The default values of the 16 SSIDs for each radio are dlink1-dlink16 (DWL-8600AP) and dlink1-dlink8 (DWL-x500AP) 4. [FIX] The View Neighboring Access Points page on the DWL-8600AP does not show all available APs 5. [FIX] When Syslog is set to display messages of Debug level and higher on DWL-3500AP, the error messages such as the following appear: map_proc.c:504:map_proc_collect_client_ association_stats - Error in opening -- /proc/net/ieee80211/wlan1/sta/ 00:11:22:33:44:55 For full details, please refer to release notes.	05/11/2011
1.00	H/W: A1 Changes in this version: 1. [FIX] Sometimes AP stops passing DHCP to the clients. AP need to be rebooted to fix the issue (AP will work fine after rebooting) 2. [FIX] When use Microsoft Windows 2008 server as DHCP and RADIUS Server. If configure the switch for RADIUS accounting, but don't enable radius accounting on the RADIUS server. The clients can connect normally at the beginning, but after several hours (< 1 day), the clients cannot authenticate successfully The issue is due to being out of RADIUS buffers on the switch that handles RADIUS accounting. For full details, please refer to release notes.	10/11/2010