Home
»
D-Link
» D-Link DGS-3100-24 - Managed L2 Gigabit Stack - Entry-Level SNMP Solution Driver/Firmware
D-Link DGS-3100-24 - Managed L2 Gigabit Stack - Entry-Level SNMP Solution Driver/Firmware
Version | Description | Date | File |
3.60 | H/W: A1, A2, B1 1. [NEW] Time-based PoE 2. [NEW] Dynamic VLAN Assignment 3. [NEW] Voice VLAN 4. [FIX] The Time Zone Offset cannot be changed via Web GUI but there is no problem for CLI command. 5. [FIX] User cannot add a VLAN name with space in CLI but no problem for Web GUI
For full details, please refer to release notes. | 10/11/2010 | |
2.50.19 | Enhancements: 1.Support MLD Snooping v1 and v2 2.Support Time based ACL 3.EAP packet (802.1x BPDU) will be flooded by default and add the control for flooding / filtering 4.Enable / Disable Telnet 5.Show utilization cpu command update 6.Be able to configure the master units port without assigning box ID 7.When try to show all ports information, the non-existing ports will not be shown 8.The IP address of connected host will be displayed on the Web UI 9.The configuration file can be copied and restored from/to running/startup config via the Web UI 10.The illegal IP address will be blocked with warning message on the CLI and Web UI for the features: Trust Host, Syslog, SNMP, SNTP, Radius and ARP. 11.Support LLDP 12.Support IGMP Querier 13.Be able to configure Traffic Segmentation on Management VLAN 14.Be able to configure ACL on LACP port 15.Remove the chipset information when switch boot up 16.Display the switchs serial number on the Web UI and CLI 17.Be able to configure the speed and duplex mode for channel group (the LACP port) 18.Be able to keep the default route when management IP changed 19.Flooding unregistered multicast group with flooding / filtering control by default 20.Change the private MIBs architecture 21.Change the default Spanning Tree status to disable 22.Add banner in the configuration file 23.When loopback is detected, the port will be shut down and after a period of time, the port will auto recovery | 11/13/2008 | |
Version | Description | Date | File |
For FW3.60 | MIB Module for H/W: A1, A2, B1 ** IMPORTANT NOTICE ** MIB Module for Firmware version 3.60. Please upgrade to Firmware version 3.60 prior to this MIB module installation
1. [NEW] Support time range configuration 2. [NEW] A standard MIB to manage IP and ICMP implementation 3. [NEW] Support new action types for storm control (drop, drop and shutdown)
| 10/11/2010 | |
For FW3.60 | D-View Module for H/W: A1, A2, B1
1. [NEW] Support time range configuration 2. [NEW] A standard MIB to manage IP and ICMP implementation 3. [NEW] Support new action types for storm control | 10/11/2010 | |
Version | Description | Date | File |
3.60 | Manual for DGS-3100-24 | 05/11/2011 | |
3.60 | Command Line Interface Manual | 05/11/2011 | |
2.30 | User Manual | 10/20/2008 | |
2.20 | Command Line Interface Manual | 10/17/2008 | |
2.20 | Hardware Installation Guide | 10/20/2008 | |
ไม่มีความคิดเห็น:
แสดงความคิดเห็น