Download
1. Samsung USB Driver | |
2. Odin | |
3. Stock Rom |
Instruction
1. Install / Update Samsung USB Driver on your computer.
2. Extract Stock Rom on your computer.
2.1 Single rom file.3. Enable USB Debugging on Samsung Device.
2.2 Multiple rom files.
3.1 Open Settings > Developers Option > USB Debugging > Tick or Slide to Enable4. Power off your Samsung Device.
3.2 Android 4.2.2 or above Go to Settings > About Phone > Built Number (Tab for 5-8 times)
5. Boot into Download Mode by Press and Hold Volume Down+Home+Power button.
In the Download mode press Volume up button to continue.
6. Extract Odin, Open Odin and connect samsung device to the computer.
7. Odin will automatically check device/port and show “Added”.
8. Choose Stock Rom
8.1 Single rom click on “PDA” button select tar.md5 file in step 2.1 and press “Start” to begin flash.9. When you see PASS! message. Samsung device will restart automatically.
8.2 Multiple rom select file in step 2.2 :
- Click on “PIT” button select .pit extension file
- Click on “BL” or “Bootloader” button select BL_xxx_tar.md5 file
- Click on “AP” button select AP_xxx_tar.md5 file
- Click on “CP” button select CP_xxx_tar.md5 file
- Click on “CSC” button select CSC_xxx_tar.md5 file and press “Start” to begin flash.
10. Now, Samsung device will Bootloop. You have to boot in to Recovery Mode by
Press and Hold Volume up+Home+Power button (Some model use Home+Power)
11. In Recovery Mode, “wipe data/factory reset” select “Yes” to continue.
12. Select reboot system now. Samsung Device will restart without Bootloop,
Stock Rom you have flashed. : )
Info :
*** Backup your personal data before flashing the Stock Rom. Flashing process is always clear personal data.
*** Downgrading and Flashing Stock Rom does not void of phone warranty.
*** Thanks for all to share some pictures for this instruction.
*** Downgrading and Flashing Stock Rom does not void of phone warranty.
*** Thanks for all to share some pictures for this instruction.
file เสียครับ
ตอบลบไฟล์ยังใช้งานได้ปกติครับ...
ลบfile AP_I9200 เสียครับ ผมโหลด 3 รอบ แตก file แล้ว winrar แจ้งว่า file AP_9200 เสียทั้ง 3 รอบ
ลบรบกวนด้วยครับ
ลบLink สำรองครับ https://drive.google.com/uc?id=0Bwa284SzFWr8VHhtRWEwY3NZQ2M
ลบI9200XXUCNC2_I9200OLBCNC1_THL เป็น Firmware 4.2.2 ครับ ผมอยากได้ 4.4.2 ครับ
ลบจะลอง Upload ให้ใหม่นะครับ..เดี๋ยวลงลิงค์ให้อีกครั้งครับ
ลบUpdate ให้ใหม่แล้วอยู่ที่ลิงค์แรกครับ
ลบใช้ดีครับผมสุดยอดแต่จากTHLของผมเป็นXSEอะครับแก้ยังไง
ตอบลบไม่ต้องแก้ไขครับ ไทย อินโด สิงค์โปร มาเลย์ เป็นโซนเดียวกันครับ
ลบของผมมันไม่ใช่THLอ่ะครับแฟรชแล้วเป็นของXSE
ตอบลบไม่ต้องแก้ไขครับ ไทย อินโด สิงค์โปร มาเลย์ เป็นโซนเดียวกันครับ
ลบFile analysis..
ตอบลบSetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
SingleDownload.
sbl1.mbn
NAND Write Start!!
sbl2.mbn
sbl3.mbn
rpm.mbn
aboot.mbn
FAIL! (Auth)
Complete(Write) operation failed.
แฟรช 4.2.2 แล้วเป็นแบบนี้อะแก้ไง