| Version | Description | Date | File |
| 2.80 | H/W: A1, A2 ** IMPORTANT NOTICE ** Please upgrade your device to version 2.50 first BEFORE upgrading to version 2.80. 1. [FIX] When telneting to the switch and enter the command sh tech_support", the switch may enter EXCEPTION MODE. 2. [FIX] sFlow may not represent the correct value of Output_interface_index. 3. [FIX] After running for 2~3 weeks, the switch's management interface can not be accessed. But all VLANs, QinQ and GVRP work well. | 10/11/2010 |  |
| 2.50 | H/W: A1, A2 1. [FIX] The switch can not be upgraded with a firmware file larger than 4MB. 2. [FIX] It takes a long time to logout IX2000(router) when telneting IX2000 from DGS-3650. 3. [FIX] When using RIP to learn dynamic routing entries, the subnet mask becomes 32. The correct one should be 24. For full details, please refer to release notes. | 10/10/2010 | |
| 2.40 | Enhancements: 1. Show memory utilization in MIB 2. Port link up/down trap 3. Null interface for CLI 4. LLDP 5. Gratuitous ARP trap/log 6. Three-Level User Account 7. Allow the option to enter not only VLAN name but also VID in "show fdb vlan" command 8. Error message to describe the naming rule of flash file system if user input the illegal file name 9. VLAN PVID auto assignment (to solve this issue that the PVID will not change with the 802.1Q untagged port setting raised in R2.2) 10. Show VLAN by VID 11. Add PIM Sparse-Dense Mode for CLI 12. SNMP state can be enable and disable 13. Support DGS-3612 product | 10/17/2008 | |
| Version | Description | Date | File |
| 2.80 | D-View Module for H/W: A1, A2 | 10/11/2010 | |
| - | D-view | 10/17/2008 | |
| Version | Description | Date | File |
| Rev.6 | Installation Guide | 12/28/2010 | |
| 2.4 | Command Line Interface Manual | 10/17/2008 | |
| 2.4 | User Manual | 10/17/2008 | |
| - | D-view | 10/17/2008 | |
ไม่มีความคิดเห็น:
แสดงความคิดเห็น