วันอาทิตย์ที่ 7 เมษายน พ.ศ. 2556

D-Link DGS-3612G - L3 Gigabit Stack - Multi-Layer Routing Switch Driver/Firmware


VersionDescriptionDateFile
2.80H/W: A1, A2

** IMPORTANT NOTICE **
Please upgrade your device to version 2.50 first BEFORE upgrading to version 2.80.


1. [FIX] When telneting to the switch and enter the command sh tech_support", the switch may enter EXCEPTION MODE.
2. [FIX] sFlow may not represent the correct value of Output_interface_index.
3. [FIX] After running for 2~3 weeks, the switch's management interface can not be accessed. But all VLANs, QinQ and GVRP work well.
10/11/2010
2.50H/W: A1, A2

1. [FIX] The switch can not be upgraded with a firmware file larger than 4MB.
2. [FIX] It takes a long time to logout IX2000(router) when telneting IX2000 from DGS-3650.
3. [FIX] When using RIP to learn dynamic routing entries, the subnet mask becomes 32. The correct one should be 24.

For full details, please refer to release notes.
10/10/2010
2.40Enhancements: 1. Show memory utilization in MIB
2. Port link up/down trap
3. Null interface for CLI
4. LLDP
5. Gratuitous ARP trap/log
6. Three-Level User Account
7. Allow the option to enter not only VLAN name but also VID in "show fdb vlan" command
8. Error message to describe the naming rule of flash file system if user input the illegal file name
9. VLAN PVID auto assignment (to solve this issue that the PVID will not change with the 802.1Q untagged port setting raised in R2.2)
10. Show VLAN by VID
11. Add PIM Sparse-Dense Mode for CLI
12. SNMP state can be enable and disable
13. Support DGS-3612 product
10/17/2008
VersionDescriptionDateFile
2.80D-View Module for H/W: A1, A210/11/2010
-D-view10/17/2008
VersionDescriptionDateFile
Rev.6Quick Installation Guide02/17/2011
2.4Command Line Interface Manual10/17/2008
2.4User Manual10/17/2008

ไม่มีความคิดเห็น:

แสดงความคิดเห็น

Related Posts Plugin for WordPress, Blogger...
Driverbiggershares - แจกฟรี ไดร์เวอร์ ,เฟิร์มแวร์ ,รอมโปรแกรม